Description

Compatible with both high and low frequency prox cards, includes both the standard straight and offset cams and stop plates to configure lock for desired rotation (direction and degrees of turn). All locks are shipped in station mode and can be easily switched to locker mode.

Installation Time: Less than 5 minutes.

Access: NFC, RFID, Prox Cards (both 125kHz and 13.56 MHz) and Wireless.

Operating Mode: All locks are shipped in station mode but can easily be switched to locker mode.

Kit Includes: Lock assembly, mounting hardware, battery.

Dimensions (5 digit): 4.6”w x 0.47d x 1.01”h
Dimensions (10 digit): 5.38”w x 0.5″d x 1.25”h
Power (5 digit): CR2032 coin cell battery
Power (10 digit): CR2450 coin cell battery
Network data communication: Wireless
Battery life: 1-2 years
Compatible Proxcards: All common standards including 125KHz ( HID Prox and Prox II, HID Indala, AWID, Keri, Ving Card, COTAG, Io Prox, Honeywell, Alarm Lock, ELK, EM, Everfocus, Farpoint, IEI, Kantech, Paradox, Secura Key, Visonic, Best) and 13.56MHz (ISO/IEC 14443A & B, 15693 Standards including, iClass, MIFARE, DESFire, Tagit, ICode)

Operating modes:
(1) Station Mode: The lock is accessed by one or more users repeatedly. The lock memory retains codes until they are intentionally erased or replaced.
(2) Locker Mode: For unassigned lockers or other storage units. The user chooses any available locker and enters an RFID card or a one-time self-selected code. This code or card is erased after the user unlocks the lock.

# of Users: Each lock can store hundreds of users
Levels of access: Master (6 digits), supervisor (3-6 digits), and user (3-6 digits)
Operating temperature: 32° – 122°
Storage temperature: 14° to 158°
Operating moisture: 20% – 80% Rh
Knob rotation: Clockwise or counterclockwise; 90 or 180 degrees
Interference: Immune to physical shock and magnetic field
Locking position: One or two
Cleaning: Withstands bleach and chemical cleaners